TV distribution cables


VATC cables are used for wave-broadcasting radios as well as analogical and numerical televisions for frequencies from 5 to 3000 MHz


UTE C 90-130


1- Conductors :

Conductors consist of solid copper.

More info

2- Dielectric

Conductors are insulated by a physical cellular polyethylene layer.
The thickness of insulation is such that the elctrical requirements are net.

3- Screen

On the cable core cover there is aluminum tape covered on one side by a polyethylene layer and a tinned copper braid.

4- Outer sheath

The sheath, consists of PVC, is complying with NF EN50290-2-22 standards. . It is unleaded and flame retardant and not spread flames (Category C2 according to NFC 32070 2.1) and resists to UV rays. It may be without halogens.

5- Marking on the sheath

Each meter the sheath has on a generator the following message:
TUNISIE-CABLES 17 VATC ss/aa + metric marking (000001.m)
17: type representing Attenuation in dB/100m (example: 23; 17;19)
ss: week number
aa: year in 2 figures
Metric marking: xxxxxx m (6 characters followed by “m” for meters)


Minimum Insulation resistance (200VDC) > 5000 M ? Km
Maximum line capacity: 60 nF/km


- Flame retardant - Category C2 NFC 32070 2.1
- Operating temperature -10°C +70° C
- These cables do not contain any substance referred to in the European Decree N° 2002/95/EC(RoHS) of January 27, 2003, relating to limiting the use of certain dangerous substances in electric and electronic equipment.