FTP CAT 5E

DATA + F/UTP CAT 5E 4P
DATA + F/UTP CAT 5E 2x4P

PRESENTATION

FTP cable is used commonly in computer networking. It is suitable for transmission until 130Mbits/s of digital and analogue voice, data and video signals with a low attenuation due to its shielding.

REFERENCE STANDARDS

Our cable is produced according to the ANSI / TIA / EIA 568; ISO / IEC 11801 and EN 50288 standards.

CABLE STRUCTURE

1- Conductors :

Conductors are solid copper with a nominal diameter of 0,51 mm (AWG 24).

More info

2- Insulation

Each conductor is insulated with a layer of solid polyethylene.
The radial thickness of the insulation is such that the electrical requirements are met.

3- Stranding

- Two wires are twisted together in pair. - Four pairs are stranded together to form the core.

4- Wrapping

A polyester wrapping tape is applied over the core.

5- Screen

Over the wrapped core cable is applied an aluminium tape, coated on one side with polyester.

6- Drain and continuity wire

A solid tinned copper conductor of 0.5 mm diameter is applied under the screen in contact with the aluminium face to ensure its continuity.

7- Rip cord

A polyester thread is applied under the outer sheath.

8- sheath

PVC or halogen-free compound ( FRNC )